0458-725-9821-C
56
English
8 Inserting and Removing Connecting Cable Plug
► Loosen the screws (2).
► Move the loop handle (1) to the required position and
make sure that:
– The spacer sleeve (3) fits between the loop handle (1)
and carrying ring.
– If you are using a mowing head: a = no more than 30 cm
– If you are using a metal cutting attachment: a = no more
than 25 cm
► Tighten down the screws (2) so that the loop handle
cannot be rotated on the drive tube.
8.1 Inserting the Connecting Cable Plug
► Hold connecting cable plug (2) so that the arrow on its side
lines up with the arrow on the socket (1).
► Insert the connecting cable plug (2) in the socket (1).
The plug (2) engages in position.
8.2 Removing the Connecting Cable Plug
► Grip the connecting cable plug (2) with your hand.
► Pull the plug (2) out of the socket (1).
9.1 Switching On
► Hold the trimmer with your right hand on the control
handle – wrap your thumb around the control handle.
► Hold the trimmer with the other hand on the loop handle -
wrap your thumb around the loop handle.
8 Inserting and Removing Connecting
Cable Plug
a
1
0000-GXX-3085-A0
2
3
0000-GXX-3086-A0
2
1
9 Switching the Trimmer On/Off
0000-GXX-3087-A0
2
1