background image

4.7

Fuel Mixture and Refueling

WARNING

■ This brushcutter requires a fuel mixture of gas‐

oline and two-stroke engine oil. Mixed fuel and

gasoline are extremely flammable. If fuel mix‐

ture or gasoline make contact with open fire or

hot objects, they can cause a fire or explo‐

sions. Persons may be seriously or fatally

injured and property may be damaged.

► Protect fuel mixture and gasoline from heat

and fire.

► Do not spill fuel mixture or gasoline.

► If fuel is spilled: Wipe up fuel with a cloth

and do not attempt to start engine until all

parts of the brushcutter are dry.

► Do not smoke.

► Never refuel near a fire.

► Shut off the engine and allow it to cool

down before refueling.

► Start the engine at least 3 meters from the

fueling spot, outdoors only.

■ Inhaling fuel fumes and gasoline fumes can

have toxic effects.

► Avoid inhaling fuel fumes or gasoline

fumes.

► Refuel in a well-ventilated location.

■ The brushcutter becomes hot during opera‐

tion. The fuel expands and excess pressure

can build up in the tank. Fuel can escape as a

spray when the fuel tank cap is opened. The

escaping fuel can ignite. This may result in

serious injury to the user.

► Allow the brushcutter to cool down first and

then open the fuel tank cap carefully.

■ Clothing that has been in contact with fuel or

gasoline will ignite more easily. Persons may

be seriously or fatally injured and property

may be damaged.

► If your clothing comes into contact with fuel

or gasoline: Change your clothing.

■ Fuel mix, gasoline and two-stroke engine oil

can harm the environment.

► Do not spill fuel, gasoline or two-stroke

engine oil.

► Dispose of fuel mix, gasoline and two-

stroke engine oil in accordance with local

regulations and environmental require‐

ments.

■ Fuel, gasoline or two-stroke engine oil can

cause irritation if they come into direct contact

with the skin or eyes.

► Avoid contact with fuel, gasoline and two-

stroke engine oil.

► If skin contact occurs: Wash affected areas

of skin with plenty of water and soap.

► If the event of contact with eyes: Rinse

eyes with plenty of water for at least

15 minutes and consult a doctor.

■ The brushcutter's ignition system produces

sparks. Unconfined sparks may cause a fire or

an explosion in an easily combustible or explo‐

sive environment. Persons may be seriously

or fatally injured and property may be dam‐

aged.

► Use the spark plugs described in this

instruction manual.

► Insert and tighten down the spark plug.

► Connect the spark plug boot and press it

down firmly.

■ The brushcutter can become damaged if it is

run with a fuel mixture that includes unsuitable

gasoline or an unsuitable two-stroke engine

oil, and also if an incorrect mix ratio of gaso‐

line and two-stroke engine oil is used.

► Mix the fuel as described in this User Man‐

ual.

■ The mixture of gasoline and two-stroke engine

oil can separate or age if it is stored for a long

period. The brushcutter can be damaged if it is

used with a fuel mix that has become separa‐

ted or has aged.

► Before refueling the brushcutter: Thor‐

oughly mix the fuel.

► Use a mixture of gasoline and two-stroke

engine oil that is not older than 30 days

(STIHL MotoMix: 5 years).

4.8

Working

WARNING

■ If the engine is not started properly, the user

may lose control of the trimmer. This may

result in serious injury to the user.

► Start the engine as described in this instruc‐

tion manual.

► If the cutting attachment is touching the

ground or objects: Do not start the engine.

■ In certain situations, the user may no longer

be able to concentrate on their work. The user

can lose control of the trimmer, stumble or fall

and be seriously injured.

► Keep calm and plan your work.

► If light and visibility are poor: Do not use

your trimmer.

► Operate the trimmer alone.

► Keep the cutting attachment close to the

ground.

► Watch out for obstacles.

English

4 Safety Precautions

8

0458-841-0101-A

Summary of Contents for FS 410





























Reviews: