Stihl FS 410 Instruction Manual Download Page 21

Page: 21 / 28

► Warm up the engine by repeatedly opening

and closing the throttle for about 1 minute.

0000-GXX-B659-A0

The engine stops while idling

► Turn the idle speed screw (LA) clockwise until

the engine runs smoothly.

Cutting attachment rotates when engine is idling

► Turn the idle speed screw (LA) counterclock‐

wise until the cutting attachment stops rotat‐

ing.

18.5

Adjusting the Throttle Cable

0000096699_002

► Press the throttle trigger (1) and keep pressed.

► Turn screw (2) clockwise until resistance is

felt.

► Turn the screw (2) clockwise through another

half-turn.

19 Specifications

19.1

STIHL FS 410 Brushcutter

–

Displacement: 41.6 cm³

–

Engine power according to ISO 8893: 2.0

kW (2.7 hp) at 9,000 rpm

–

Idle speed : 2,800 rpm

–

Max. output shaft speed: 9.360 rpm

–

Approved spark plug: NGK CMR6H from

STIHL

–

Electrode gap of the spark plug: 0.5 mm

–

Dry weight without cutting attachment and

deflector: 8.4 kg

–

Length without cutting attachment: 1795 mm

–

Max. fuel tank capacity: 750 cm³ (0.75 l)

19.2

STIHL FS 460 Brushcutter

–

Displacement: 45.6 cm³

–

Engine power according to ISO 8893:

2.2 kW (3.0 hp) at 9,500 rpm

–

Idle speed : 2,800 rpm

–

Max. output shaft speed: 9.360 rpm

–

Approved spark plug: NGK CMR6H from

STIHL

–

Electrode gap of the spark plug: 0.5 mm

–

Dry weight without cutting attachment and

deflector: 8.4 kg

–

Length without cutting attachment: 1795 mm

–

Max. fuel tank capacity: 750 cm³ (0.75 l)

19.3

Sound Values and Vibration

Values

The K-value for the sound pressure levels is

2 dB(A). The K-value for the sound power levels

is 2 dB(A). The K-value for vibration level is

2 m/s².
Using with a mowing head

FS 410

–

Sound pressure level L

peq

measured accord‐

ing to ISO 22868: 101 dB(A).

–

Sound power level L

measured according to

ISO 22868: 110 dB(A)

–

Vibration level a

measured according to

ISO 22867:

–

Control handle: 2.6 m/s².

–

Left handle: 2.9 m/s².

FS 460

–

Sound pressure level L

peq

measured accord‐

ing to ISO 22868: 102 dB(A).

–

Sound power level L

measured according to

ISO 22868: 111 dB(A)

–

Vibration level a

measured according to

ISO 22867:

–

Control handle: 2.6 m/s².

–

Left handle: 2.9 m/s².

Using with a metal cutting attachment

FS 410

–

Sound pressure level L

peq

measured accord‐

ing to ISO 22868: 100 dB(A).

–

Sound power level L

measured according to

ISO 22868: 110 dB(A)

–

Vibration level a

measured according to

ISO 22867:

–

Control handle: 2.5 m/s².

–

Left handle: 2.9 m/s².

FS 460

–

Sound pressure level L

peq

measured accord‐

ing to ISO 22868: 103 dB(A).

–

Sound power level L

measured according to

ISO 22868: 112 dB(A)

19 Specifications

English

0458-841-0101-A

Summary of Contents for FS 410





























Search results

Summary of Contents for FS 410

Reviews:

Brands by name

Popular brands

Stihl FS 410, Instruction Manual

Search results

Summary of Contents for FS 410

Reviews:

Brands by name

Popular brands