manualshive.com logo in svg

Stihl FS 410, Instruction Manual

Share
Download
Stihl FS 410 Instruction Manual Download Page 23

21 Spare Parts and Accesso‐

ries

21.1

Spare parts and accessories

These symbols indicate original STIHL

spare parts and original STIHL acces‐

sories.

STIHL recommends the use of original STIHL

spare parts and accessories.
Despite ongoing market observation, STIHL is

unable to judge the reliability, safety and suitabil‐

ity of other manufacturers' spare parts and

accessories; accordingly, STIHL cannot warrant

for the use of those parts.
Original STIHL spare parts and original STIHL

accessories are available from STIHL dealers.

22 Disposal

22.1

Disposing of the Brushcutter

Contact the local authorities or your STIHL

dealer for information on disposal.
Improper disposal can be harmful to health and

pollute the environment.

► Take STIHL products including packaging to a

suitable collection point for recycling in accord‐

ance with local regulations.

► Do not dispose with domestic waste.

23 EC Declaration of Con‐

formity

23.1

STIHL FS 410, FS 460 Brush‐

cutter

ANDREAS STIHL AG & Co. KG

Badstraße 115

D-71336 Waiblingen
Germany
declare under our sole responsibility that

–

Category: Brushcutter

–

Manufacturer's brand: STIHL

–

Type: FS 410, FS 460

–

Serial identification number: 4147

conforms to the relevant provisions of Directives

2011/65/EU, 2006/42/EC, 2014/30/EU and

2000/14/EC and has been developed and manu‐

factured in compliance with the following stand‐

ards in the versions valid on the date of produc‐

tion: EN ISO 11806-1, EN 55012 and

EN 61000‑6‑1.

The measured and guaranteed sound power lev‐

els were determined according to Directive

2000/14/EC, Annex V.

FS 410

–

Measured sound power level: 113 dB(A)

–

Guaranteed sound power level: 115 dB(A)

FS 460

–

Measured sound power level: 115 dB(A)

–

Guaranteed sound power level: 117 dB(A)

The technical documents are stored at

ANDREAS STIHL AG & Co. KG Produktzulas‐

sung.
The year of manufacture, country of manufacture

and serial number are specified on the rating

plate of the brushcutter.
Waiblingen, 01.10.2021
ANDREAS STIHL AG & Co. KG

pp
Dr. Jürgen Hoffmann, Director Product Certifica‐

tion & Regulatory Affairs

24 UKCA Declaration of Con‐

formity

24.1

STIHL FS 410, FS 460 Brush‐

cutter

ANDREAS STIHL AG & Co. KG

Badstraße 115

D-71336 Waiblingen
Germany
declare under our sole responsibility that

–

Category: Brushcutter

–

Manufacturer's brand: STIHL

–

Type: FS 410, FS 460

–

Serial identification number: 4147

conforms to the relevant provisions of UK regula‐

tions The Restriction of the Use of Certain Haz‐

ardous Substances in Electrical and Electronic

Equipment Regulations 2012, Supply of Machi‐

nery (Safety) Regulations 2008, Electromagnetic

Compatibility Regulations 2016 and Noise Emis‐

sion in the Environment by Equipment for use

Outdoors Regulations 2001 and has been manu‐

21 Spare Parts and Accessories

English

0458-841-0101-A

23

Summary of Contents for FS 410





























Reviews:

No comments

Brands by name

Popular brands

Load more brands