background image

KM 56 R:

8100 rpm

KM 85 R:

8500 rpm

KM 90 R:

8300 rpm

KM 94 R:

8300 rpm

KM 100 R:

8300 rpm

KM 110 R:

8300 rpm

KM 130 R:

8500 rpm

KMA 130 R:

6890 rpm

KMA 135 R:

6890 rpm

Max. output shaft speed (cutting attachment) on

STIHL brushcutters with split shaft (T models):
FR 130 T:

8300 rpm

18.2

Weight

with deflector and blade:

2.0 kg

18.3

Sound and Vibration Levels

Noise and vibration data measurements on

power tools with the FCB‑KM KombiTool include

idling and rated maximum speed with the same

duration of exposure.
For further details on compliance with Vibration

Directive 2002/44/EC see
www.stihl.com/vib
18.3.1

Sound pressure level L

peq

 to ISO

11201

KM 55 R with loop handle:

93 dB(A)

KM 56 R with loop handle:

94 dB(A)

KM 85 R with loop handle:

96 dB(A)

KM 90 R with loop handle:

90 dB(A)

KM 100 R with loop handle:

90 dB(A)

KM 130 with bike handle:

95 dB(A)

KM 130 R with loop handle:

95 dB(A)

FR 130 T:

94 dB(A)

18.3.2

Sound pressure level L

peq

 to ISO

11789

KM 94 R with loop handle:

92 dB(A)

18.3.3

Sound pressure level L

peq

 in accord‐

ance with 50636-2-92

KM 130 R with loop handle:

78 dB(A)

18.3.4

Sound pressure level L

peq

 in accord‐

ance with 50636-2-100

KM 135 R with loop handle:

79 dB(A)

18.3.5

Sound power level L

weq

 in accordance

with ISO 3744

KM 55 R with loop handle:

103 dB(A)

KM 56 R with loop handle:

104 dB(A)

KM 85 R with loop handle:

108 dB(A)

KM 90 R with loop handle:

101 dB(A)

KM 100 R with loop handle:

101 dB(A)

KM 130 with bike handle:

105 dB(A)

KM 130 R with loop handle:

105 dB(A)

FR 130 T:

105 dB(A)

18.3.6

Sound power level L

weq

 in accordance

with ISO 11789

KM 94 R with loop handle:

104 dB(A)

18.3.7

Sound power level L

w

 in accordance

with EN 50636-2-92

KM 130 R with loop handle:

93 dB(A)

18.3.8

Sound power level L

w

 in accordance

with EN 50636-2-100

KM 135 R with loop handle:

99 dB(A)

18.3.9

Vibration level a

hv,eq

 to ISO 11789

Handle, left Handle,

right

KM 55 R with loop

handle and Ergo‐

Start:

5.6 m/s

2

7.3 m/s

2

KM 56 R with loop

handle:

5.5 m/s

2

6.6 m/s

2

KM 85 R with loop

handle:

3.2 m/s

2

6.0 m/s

2

KM 90 R with loop

handle:

4.5 m/s

2

3.5 m/s

2

KM 100 R with loop

handle:

3.7 m/s

2

4.8 m/s

2

KM 130 with bike

handle:

5.8 m/s

2

3.6 m/s

2

KM 130 R with loop

handle:

6.1 m/s

2

6.8 m/s

2

FR 130 T:

3.9 m/s

2

2.3 m/s

2

18.3.10 Vibration level a

hv,eq

 in accordance

with ISO 22867

Handle, left Handle,

right

KM 94 R with loop

handle:

4.9 m/s

2

4.1 m/s

2

18.3.11 Vibration level a

hv,eq

 in accordance

with EN 50636-2-92

Handle, left Handle,

right

KM 130 R with loop

handle:

3.5 m/s

2

2.0 m/s

2

18.3.12 Vibration level a

hv,eq

 in accordance

with EN 50636-2-91

Handle, left Handle,

right

KM 135 R with loop

handle:

1.8 m/s

2

3.6 m/s

2

The K‑factor in accordance with Directive

2006/42/EC is 2.0 dB(A) for the sound pressure

level and sound power level; the K‑factor in

accordance with Directive 2006/42/EC is
2.0 m/s

2

 for the vibration level.

18 Specifications

English

0458-471-0121-C

15

Summary of Contents for FCB-KM





















Reviews: