4.3
Edging
239BA016 KN
► Start the engine
► Start the cut at no less than half throttle and
continue cutting at full throttle.
► Hold and guide your power tool so that the
blade is vertical.
► Cut steadily so that the engine is not lugged
down – do not apply force.
► Operate at no more than a normal walking
pace.
► Do not push the blade into the ground.
► Always walk forwards when cutting, do not pull
the unit towards you.
► Cut at a steady pace to avoid having to make
several passes.
1
239BA017 KN
► Use the gunning sight (1) to line the blade up
with the edge of the bed.
5
Approved KombiEngines
5.1
KombiEngines
Only use KombiEngines supplied or explicitly
approved by STIHL for use with the attachment.
This KombiTool may be operated only in combi‐
nation with the following KombiEngines:
STIHL KM 55 R, KM 56 R, KM 85 R, KM 90,
KM 90 R, KM 94 R, KM 100, KM 100 R, KM 110,
KM 110 R, KM 130, KM 130 R, KMA 130 R,
KMA 135 R
WARNING
Loop-handled machines must be equipped with
a barrier bar.
5.2
Brushcutters with split boom
The KombiTool can also be fitted to STIHL
brushcutters with a split boom (T-models) (basic
power tools).
This KombiTool can therefore also be used on
the following machine:
STIHL FR 130 T
English
5 Approved KombiEngines
8
0458-471-0121-C