![background image](http://html1.mh-extra.com/html/stihl/fc-75/fc-75_user-manual_1378585025.webp)
- Remove fan housing with pro-
tective tube,
•
Disconnect short-circuit wire
from socket on ignition module.
•
In machines with two short-
circuit wires, they must be dis-
connected from socket on igni-
tion module and from terminal
socket.
•
Pull terminal off spark plug.
•
Remove screws.
•
Remove ignition module.
•
Remove spark plug terminal,
Note: The ignition lead is em-
bedded in the ignition module.
- Position ignition module and
insert screws, but do not tighten
them yet.
•
Secure ground wire (1) and
connector tab (2) for short-circuit
wire to upper screw.
Important! One plastic washer
(3) must be fitted on the upper and
lower screw between cylinder and
ignition module.
•
Slide setting gauge (1) 4118 890
6401 between arms of ignition
module and flywheel magnets.
392RA064
3
1
2
VA
392RA058
VA
392RA061
VA
392RA065
1
VA
392RA063
VA
392RA057
VA
392RA062
VA
392RA059
VA
25