![background image](http://html1.mh-extra.com/html/stihl/fc-75/fc-75_user-manual_1378585023.webp)
•
Press home with press sleeve
(1) 1115 893 4600.
- Remove assembly sleeve.
- Slide oil seal with open side
facing crankcase over crankshaft
stub on clutch side.
•
Press home with press sleeve
(1) 4112 893 2401.
The remaining parts are assem-
bled in reverse order.
Important! Great care must be
taken when carrying out main-
tenance and repair work or trou-
bleshooting on the ignition system.
The high voltages can cause
serious or even fatal accidents!
Troubleshooting on the ignition
system should always start with
the spark plug. Refer to the ma-
nual "Troubleshooting, standard
repairs".
Note: The transistorized (breaker-
less) ignition system essentially
comprises the ignition module (1)
and flywheel (2).
- Remove shroud,
•
Pull terminal off spark plug.
•
Grip leg spring with pliers and
pull it out of the spark plug termi-
nal.
- Unhook leg spring from ignition
lead.
- Slip spark plug terminal off lead.
- Coat end of ignition lead
(approx. 20 mm) with oil.
- Fit spark plug terminal over
ignition lead.
- Grip end of ignition lead with
pliers and pull it out of spark
plug terminal.
1
1
366RA098 VA
1
1
2
2
392RA053 VA
392RA054
VA
1
1
366RA099 VA
392RA055
VA
23