36
FC 75, FC 85, FH 75, FS 75, FS 80, FS 85, HL 75, KM 85, KW 85
:
Pull the slide control out of the
handle molding.
VA
936RA148
:
Pull out the rivet (1).
:
Remove the contact spring (2).
Install in the reverse sequence.
The contact spring must engage the
annular groove in the collar screw.
VA
936RA149
2
1
FS 75, 80, 85 only
– Remove the shroud,
:
Disconnect throttle cable nipple
(1) from slotted pin (2) on
carburetor’s throttle lever.
VA
936RA150
2
1
:
Pull the throttle cable out of the
tensioner.
VA
936RA151
:
Pull the connectors (arrows) off
the tags on the ignition module.
– Remove the throttle trigger,
– Pull the short circuit wires off the
connector tags in the control
VA
936RA152
handle,
Install in the reverse sequence.
Position the short circuit wires,
throttle cable and tube correctly in
the inner handle molding.
8.5.3
Throttle Cable