background image

Minimum length (tooth): 10 mm

Sharpening angle: 45°

20.3

STIHL AP battery

Battery Technology: Lithium-ion

Voltage: 36 V

Capacity in Ah: see rating label

Energy content in Wh: see rating label

Weight in kg: see rating label

Permissible temperature range for operation

and storage: -10°C to +50°C

20.4

Sound Values and Vibration

Values

The K-value for the sound pressure levels is

2 dB(A). The K-value for the sound power levels

is 2 dB(A). The K-value for vibration level is

2 m/s².
STIHL recommends wearing ear defenders.

Sound pressure level L

pA

 measured as speci‐

fied in EN 50636‑2‑91: 81 dB(A)

Sound power level L

wA

 measured according to

EN 50636-2-91: 93 dB(A)

Vibration level a

hv

 measured according to

EN 50636-2-91

Control handle: 2.4 m/s²

Left handle: 2.3 m/s²

The vibration levels indicated were measured

according to a standardized test method and can

be used as a basis for comparing electric power

tools. The vibration levels actually occurring may

vary from the values indicated, depending on the

type of application. The vibration levels indicated

can be used for an initial estimate of the vibration

stress. The actual vibration stress has to be esti‐

mated. The times can be taken into account in

the estimate when the electric power tool is

switched off and also when it is switched on but

running without any load.
For information on compliance with Employers'

Vibration Directive 2002/44/EC see

www.stihl.com/vib.

20.5

REACH

REACH is an EC regulation and stands for the

Registration, Evaluation, Authorisation and

Restriction of Chemical substances.
For information on compliance with the REACH

regulation see www.stihl.com/reach.

21 Spare Parts and Accesso‐

ries

21.1

Spare parts and accessories

These symbols indicate original STIHL

spare parts and original STIHL acces‐

sories.

STIHL recommends the use of original STIHL

spare parts and accessories.
Despite ongoing market observation, STIHL is

unable to judge the reliability, safety and suitabil‐

ity of other manufacturers' spare parts and

accessories; accordingly, STIHL cannot warrant

for the use of those parts.
Original STIHL spare parts and original STIHL

accessories are available from STIHL dealers.

22 Disposal

22.1

Disposal of the Weeder and

Battery

Contact the local authorities or a STIHL servicing

dealer for information on disposal.
Improper disposal can be harmful to health and

pollute the environment.

► Take STIHL products including packaging to a

suitable collection point for recycling in accord‐

ance with local regulations.

► Do not dispose with domestic waste.

23 EC Declaration of Con‐

formity

23.1

STIHL RG 140 Weeder

ANDREAS STIHL AG & Co. KG

Badstraße 115

D-71336 Waiblingen
Germany
declares under our sole responsibility that

Design: battery-powered weeder

Manufacturer's brand: STIHL

Model: RGA 140

Serial identification: FA02

conforms to the relevant provisions of Directives

2011/65/EU, 2006/42/EC and 2014/30/EU and

has been developed and manufactured in com‐

pliance with the following standards in the ver‐

sions valid on the date of production:

EN 55014‑1, EN 55014‑2, EN 62233, EN

60335‑1 and EN ISO 12100, taking

EN 50636‑2‑91 into account.

21 Spare Parts and Accessories

English

0458-845-0101-A

17

Summary of Contents for FA02





















Reviews: