manualshive.com logo in svg

Stihl FA02, Instruction Manual

Share
Download
Stihl FA02 Instruction Manual Download Page 14

16 Cleaning

16.1

Cleaning the Weeder

► Switch off the weeder and remove the battery.

► Allow gear housing to cool down.

► Clean the weeder with a damp cloth.

► Clean vents with a paintbrush.

► Remove foreign objects from the battery com‐

partment and clean the battery compartment

with a damp cloth.

► Clean the electrical contacts in the battery

compartment with a paintbrush or soft brush.

16.2

Cleaning the Blades

► Switch off the weeder.

► Spray the blades with STIHL resin solvent.

► Switch on weeder for 5 seconds.

The blades rotate. The STIHL resin solvent is

distributed evenly.

16.3

Cleaning the Air Filter

► Switch off the weeder and remove the battery.

0000097125-001

1

2

► Clean the area around the air filter (2) with a

damp cloth or paintbrush.

► Turn the screw (1) counterclockwise until the

air filter (2) can be removed.

► Swing the air filter (2) upwards and pull it off.

► Pass the air filter (2) under running water to

rinse off coarse dirt from the outside.

► If the air filter (2) is damaged: Install a new air

filter (2).

► Allow the air filter (2) to dry in the air.

► Install the air filter (2) in the housing and fold it

down.

The air filter (2) must sit flush in the housing at

all sides.

► Insert and firmly tighten the screw (1).

16.4

Cleaning the Battery

► Clean the battery with a damp cloth.

17 Maintenance

17.1

Maintenance intervals

Maintenance intervals depend on the ambient

conditions and the operating conditions. STIHL

recommends the following maintenance inter‐

vals:
After every 25 hours of operation

► Lubricate the gearbox.
After every 50 hours of operation

► Clean the air filter.
Annually

► Have the weeder checked by a STIHL servic‐

ing dealer.

17.2

Lubricating the Gearbox

► Switch off the weeder.

 2

1

0000-GXX-8739-A0 

► Remove screw plug (2).

► If no grease can be seen on the end of the

screw plug (2):

► Screw in the tube of STIHL gear lubri‐

cant (1).

► Squeeze 10 g of STIHL gear grease into the

gear housing.

► Unscrew the tube of STIHL gear lubri‐

cant (1).

► Insert and tighten the screw plug (2)

securely.

► Switch on the KombiEngine for 1 minute.

The STIHL gear lubricant is evenly distrib‐

uted.

17.3

Removing and Attaching the

Blade

17.3.1

Removing the Blades

WARNING

■ The cutting edges of the blades are sharp.

There is a risk of cutting oneself.

► Wear work gloves made of robust material.

► Switch off the weeder.

English

16 Cleaning

14

0458-845-0101-A

Summary of Contents for FA02





















Reviews:

No comments

Brands by name

Popular brands

Load more brands