Stihl Cutquik TS 410-A, Technical Information

Page: 11 / 11

Technical Information 19.2010 Page 11
TI_19_2010_30_01_01.fm
5.11 Repair times
The specified repair times apply for trained and
qualified personnel as well as for properly equipped
repair shops.
The repair times are specified in minutes.
© ANDREAS STIHL AG & Co. KG, 2010 Technical Documentation
D1/MTK-fr
Code Type of Repair
TS410-A
TS420-A
2 Replace wheel guard 20
3 Replace wheel bearing bracket assembly. 25
4 Replace belt pulley on wheel arbor. 15
5 Replace wheel arbor shaft. 15
6 Replace arbor shaft bearing. 25
7 Replace belt pulley on clutch end. 25
8 Replace drive belt. 15
9 Replace front handlebar. 15
10 Replace cast arm from engine to wheel 25
11 Replace crankcase, crankcase gasket or re-seal crankcase. Includes air leak test. 160
12 Replace crankshaft main bearing(s). Includes air leak test. 170
13 Replace crankshaft seal(s). Includes air leak test. 70
14 Perform engine air leak test. 30
15 Replace cylinder and/or piston. Includes air leak test and repair of components causing failure. 90
16 Replace ignition module or flywheel. Includes stop circuit test. 25
17 Replace fuel tank line, vent line, or fuel pick-up body. 40
18 Replace intake or transfer port manifold or intake flange 35
19 Repair or replace carburetor. Includes fuel system testing. 45
20 Repair or replace rewind starter 15
21 Repair or replace clutch, clutch shoes or clutch springs. 20
22 Replace rear handle frame or handle housing 30
23 Replace muffler 25
24 Replace air filter or filter housing 15
25 Repair or replace stop switch. Includes circuit testing. 35
26 Replace fuel tank housing 60
27 Replace control panel. Includes electrical and run test. 25
28 Replace generator. Includes electrical and run test. 30
29 Replace solenoid valve. Includes electrical and run test. 20
30 Replace short circuit wire, air baffle. Includes electrical and run test. 25
40 Miscellaneous repairs and other repairs not listed. 15
45 Handling allowance only-no labor. 10
50 No Labor 0