Observe safety precautions - see chap-
ter "Safety Precautions" in this manual.
•
Slide the stop switch
to
•
Move the setting lever
to
the center position -
VWDUWLQJWKURWWOHSRVLWLRQ
.
1RWH
The setting lever can be used to select
any throttle opening between idle speed
(lower stop) and full throttle (upper stop).
Set the lever to idle speed before
shutting down the engine.
•
f the engine is
FROG
, turn the
choke knob to
N
•
If the engine is
ZDUP
, turn the
choke knob to
H
Also use this position if the engine
has ben running but is still cold.
•
Put the unit on the ground.
Check that bystanders are well
clear of the general work area and
the nozzle.
•
Make sure you have a firm footing:
Hold the unit with your left hand on
the housing and put one foot
against the base plate to prevent it
slipping.
•
Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull the starter rope out
more than 75cm (30") as it might
otherwise break.
•
Do not let the starter grip snap back.
•
Guide it slowly back into the
housing so that the starter rope can
rewind properly.
353BA010
1
353BA014
353BA011
2
6WDUWLQJ
%5