Tools are stowed on the underside of
the blower (one combination wrench and
one carburetor screwdriver)
0RXQWLQJWKHHOERZ
•
Line up the stops on the elbow
and fan housing stub
.
•
Push the elbow
into the stub
as far as it will go
•
Fit the nut
into the hexagon
recess on the stub.
•
Insert the screw in the nut from the
other side and tighten moderately -
the elbow must still turn.
Important: The throttle cable is already
connected and must not be kinked
during assembly.
•
Secure throttle cable
to the
pleated hose with the retainer
.
0RXQWLQJWKHEORZHUWXEH
•
Push the blower tube
into the
pleated hose
.
•
Push blower tube
onto the end
of tube
and rotate it clockwise to
engage the bayonet coupling.
•
Push the nozzle
onto the end
of blower tube
and rotate it
clockwise to engage the bayonet
coupling.
•
Rotate the pleated hose
counter-
clockwise as far as the stop and
leave it in that position.
•
Turn the control handle
to the
horizontal position.
•
Now rotate the complete blower
tube until the nozzle points in the
same direction as the control
handle.
•
Tighten down the clamp screw
.
$VVHPEOLQJWKH%ORZHU
353BA002
2
3
1
353BA003
8
7
4
9
10
6
11
5
%5