Stihl BGA 45, Instruction Manual

Page: 25 / 60

0458-719-8621-A
23
English 22 Troubleshooting Guide
22.1 Troubleshooting
22 Troubleshooting Guide
Always remove the activation key before carrying out any inspection, cleaning or maintenance.
Condition LEDs on the
blower
Cause Remedy
3 LEDs flash
red.
Malfunction in
blower.
► Do not attempt to use. The blower has a malfunction and
must be checked by a servicing dealer.
Blower does not start
when switched on.
Activation key not
fully inserted.
► Remove the activation key,
@
13.2.
► Visually check the electrical contacts of the activation key.
► Reinsert the activation key,
@
13.1.
1 LED flashes
green.
Less than 20 %
charge remaining.
► Charge the blower,
@
10.
3 LEDs glow
red.
Integrated battery
too hot.
► Remove the activation key,
@
13.2.
► Allow the blower to cool down gradually at ambient
temperatures of about 50 °F to 68 °F (10 °C to 20 °C).
Moisture in blower. ► Allow the blower to dry.
Blower cuts out
during operation.
3 LEDs glow
red.
Integrated battery
too hot.
► Remove the activation key,
@
13.2.
► Allow the blower to cool down gradually at ambient
temperatures of about 50 °F to 68 °F (10 °C to 20 °C).
Electrical
malfunction.
► Switch off the blower. Wait at least 5 seconds and switch it
back on,
@
14.
Run-time is too short. Blower not fully
charged.
► Charge the blower,
@
10.
Useful life of
integrated battery
has been reached or
exceeded.
► Have the blower checked by an authorized STIHL servicing
dealer.
Integrated battery
too hot / too cold.
► Allow the blower to warm up or cool down gradually at
ambient temperatures of about 50 °F to 68 °F (10 °C to
20 °C).
Blower is not being
charged.
3 LEDs glow
red.
Integrated battery
too hot / too cold.
► Allow the blower to warm up or cool down gradually at
ambient temperatures of about 50 °F to 68 °F (10 °C to
20 °C).
► Operate the charger only in enclosed, dry rooms at ambient
temperatures of 32 °F to 104 °F (0 °C to 40 °C).