0458-719-8621-A
21
English
20 Cleaning
WARNING
High temperatures may cause the integrated battery to
generate heat, rupture, leak, ignite or explode, resulting in
severe or fatal personal injury or property damage,
5.6.
Use and store the blower only within an ambient
temperature range of 32 °F to 122 °F (0 °C to 50 °C),
When storing the blower:
► Switch off the blower,
► Remove the activation key,
13.2.
► Clean the blower,
► Store the blower indoors in a dry and secure location, out
of the reach of children and other unauthorized persons.
► Store the activation key away from the blower in a safe
place that is inaccessible to children and other
unauthorized users.
► Protect the blower against dampness and corrosive
agents such as garden chemicals and de-icing salts.
► For maximum battery life, store the blower at an ambient
temperature between 50 °F and 68 °F (10 °C and 20 °C)
with a charge between 40 % and 60 % (2 green LEDs).
► If the blower is used or stored at ambient temperatures
above 86 °F (30 °C), its runtime and performance may be
reduced.
► Never store the blower with the activation key inserted.
► Before storing, always unplug the charger from the
electrical outlet.
NOTICE
￭ A blower that is not stored properly may experience deep
discharge, which can result in permanent damage. To
avoid deep discharge:
– For maximum battery life, store the blower with a
charge between 40 % and 60 % (2 green LEDs).
– For maximum battery life, store the blower at an
ambient temperature between 50 °F and 68 °F
(10 °C and 20 °C).
19.2 Charger
To properly store the charger:
► Disconnect the charger from the electrical outlet.
► Disconnect the charger from the blower.
► Store the charger indoors in a dry and secure location.
► Keep it out of the reach of children and other unauthorized
persons.
20.1 Cleaning the Blower and Charger
WARNING
To reduce the risk of personal injury from unintended
activation, remove the activation key before carrying out any
cleaning work,
7.1. Users of this blower should carry out
only the cleaning described in this manual.
To clean the blower and charger:
► Clean a dirty intake screen carefully with a soft brush
whenever required.
► Clean the blower's polymer components with a slightly
dampened cloth. Do not use detergents or solvents. They
may damage the polymer components.
► Do not use a pressure washer to clean the blower or
otherwise spray it with water or other liquids.
► Keep the charger housing and electrical contacts free
from foreign matter. Clean as necessary with a soft brush
or soft, dry cloth. Always unplug the charger before
cleaning.
20 Cleaning
