![background image](http://html1.mh-extra.com/html/stihl/029-039/029-039_service-manual_1378802041.webp)
STIHL 029, 039
41
5.1.3
Spark Plug Terminal
Top:
Removing dust seal
Bottom:
Pulling leg spring out of spark
plug terminal
- Fit the dust seal over the spark
plug terminal.
- Fit the terminal on the spark plug.
Push the ignition lead into the
retainer and groove on the cover.
- Fit the handle housing - see 8.1.1.
- Remove handle housing - see
- Pull terminal off the spark plug and
remove the ignition lead from the
retainer.
- Pull the dust seal off the spark
plug terminal and push it down
the ignition lead.
- Use a suitable pair of pliers to
grip the leg spring and pull it out
of the spark plug terminal.
- Unhook the leg spring from the
ignition lead and slip the spark
plug terminal and dust seal off
the lead.
- Slip the dust seal over the
ignition lead.
- Coat end of the ignition lead
with oil (about 20 mm/3/4").
- Fit spark plug terminal over the
ignition lead.
- Use suitable pliers to grip the end of
the ignition lead inside the spark
plug terminal and pull it out.
Pinch the hook of the leg spring into
the center of the lead, i.e. about 10
mm (3/8") from the end of the lead.
- Pull the lead back into the
terminal so that the leg spring
locates properly inside it (see
illustration).
Fitting dust seal
Top:
Fitting the leg spring
Bottom:
Correct position of leg spring in spark
plug terminal