4
NET ASSEMBL
NET ASSEMBL
NET ASSEMBL
NET ASSEMBL
NET ASSEMBLY
YY
YY
Net System Description
Net System Description
Net System Description
Net System Description
Net System Description
1. Net P
1. Net P
1. Net P
1. Net P
1. Net Post Assembly
ost Assembly
ost Assembly
ost Assembly
ost Assembly
Attach plastic net post as shown with washer and knob. Note:
there is a left and right net post assembly (See Net System De-
scription). Post assembly should rest flat against nut plate. Slide
the net sleeve over the vertical post while the net post assembly is
folded in toward the side of the table top. Fold the net post
assembly out against the net post stop into the post and secure
bead chain in catch.
2. Adjustments
2. Adjustments
2. Adjustments
2. Adjustments
2. Adjustments
A - Adjust overall net tension by slightly loosening the knob and
moving net post assembly. Moderately tighten knob. Net post as-
sembly should be kept square with the table by the net post stop
(See Net System Description).
B - Adjust tension of cord with bead chain on each side. Assure
that chain is fully seated in catch.
C - Position top of net to a regulation height of 6”
from the table surface by firmly gripping the vertical net post within
height adjustment slot.
3. Storage
3. Storage
3. Storage
3. Storage
3. Storage
Caution: To prevent damage to the net system and/or
table top, the post assembly must be pivoted toward
side of table before lifting table tops to storage position.
Loosen knob and pivot net post toward table side as far as it will
go. Retighten Knob.