Edition
Manual
Chapter
Page
2008-03-18 Workshop Manual, Stiga Primo
1 General
8
Seat
Adjust the seat backwards/forwards to a
comfortable driving position.
The seat can be folded and adjusted front-rear.
To adjust the seat, slacken off the three screws
(P), set the seat to the desired position and
tighten the screws.
Tightening torque: 20-24 Nm.
If the screws are tightened more than
24 Nm, the seat will be damaged.
The seat is equipped with a safety switch that is
connected to the machine’s safety system. This
means that certain dangerous activities are not
possible when there is nobody sitting on the
seat.
Backrest
The backrest can be adjusted laterally and
vertically. To adjust the backrest, slacken off the
screws (O), set the backrest to the desired
position and tighten the screws. Tightening
torque: 20-24 Nm.
If the screws are tightened more than
24 Nm, the seat will be damaged.
Battery
Fold the seat up and install the battery leads.
See also“1.4.2”.
Engine oil
Check the oil level in the engine and top up if
necessary.
A
P
O
N