Edition
Manual
Chapter
Page
2008-03-18 Workshop Manual, Stiga Primo
4 Belts
6
5. Unhook all springs and note where the
respective spring is attached.
6. Remove the split pin and unhook the rod (R)
at the front.
7. Remove the pulley (5). Use a 15 mm and a
17 mm wrench.
8. Take off the belt (B) first from pulley (8), then
thread it around the pulley 3 and finally,
remove it.
9. Remove the pulley (6). Use a 15 mm and a
17 mm wrench.
10.Remove the belt (C) from the pulleys (4) and
(7).
4.3.2 Inspection and measures
1. Check and lubricate all links.
•
The links shall move easily and not have
any major play.
•
Lubricate all pivot linkages with machine
oil.
2. Check the belts.
•
The belt shall rest with its angled sides
against the pulleys. There must be a
space between belt and pulley bottom.
•
The belt shall be intact. No loose parts or
cracks.
3. Check all ball bearings with respect to the
following:
•
No radial play.
•
The sealing shall be intact.
•
No abnormal noise when rotating. Shall
rotate evenly without stop tendency.
Replace all defective parts with genuine
spare parts.
3
B
5
8
R
6
7
C
4