Edition
Manual
Chapter
Page
2008-03-18 Workshop Manual, Stiga Primo
1 General
2
1.1 Introduction
1.1.1 Responsibility declaration
In spite of the great care we have taken there may be errors in this publication.
The author cannot be made liable for incorrect or missing information.
GGP SE reserves the right to regularly change product specifications without prior notice.
All the information in this book is based on the information available at the time of
production. Illustrations and photographs may be arranged schematically, which implies
that one picture may cover several models and therefore not correspond exactly with all
models.
1.1.2 How this manual is used
To make this manual easy to understand we have divided the machine into its main
systems and components. These parts are now the different chapters in the book.
Each chapter is divided up into sections.
There is a quick-guide on the cover of this book, which refers to the different chapters. In
each chapter there is a detailed table of contents so that you can easily and quickly find
what you are looking for.
1.2 Safety Precautions
This manual has been written primarily for trained mechanics working in a well-equipped
workshop. Nevertheless, the manual contains such detailed information that it can also be
of use to owners who wish to carry out simple service and repairs on their machine.
A basic knowledge of repairs, tools and repair instructions is, however, always a
prerequisite for first-rate results.
A qualified mechanic should always be consulted if the owner does not have sufficient
knowledge to carry out repairs.
During the warranty period all service must be carried out by an Authorised Workshop for
the warranty to be valid.
The following basic points should be observed if the machine is to function perfectly:
• Follow the service schedule.
• Be on the alert for sudden vibrations or abnormal noise to avoid major breakdowns.
• Always use Genuine Spare Parts
• Follow the descriptions in this manual carefully. Do not take any short cuts.
1.2.1 Before service or maintenance
Before service or maintenance is carried out, the mesures below shall be performed:
• Prevent the machine from rolling by always applying the parking brake.
• Prevent unintentional starting of the engine by removing the ignition key.
• All service and all maintenance must be carried out on a stationary machine with the
engine switched off.