EN - 3
•
When used as a blower always pay the utmost
attention to prevent removed material or dust
from injuring people or animals or damaging
property.
•
Do not manually insert objects into the vacuum
inlet.
•
Do not attempt to vacuum pieces of metal,
rocks, bottles, cans, other foreign bodies and
bulky objects that could
damage the rotor.
•
Never stand higher than the base of the machine
when vacuuming objects.
•
Always keep your face, hands, and body away
from the inlet grille and air outlet nozzle and
do not obstruct the airways when starting and
operating the machine.
• The rotating parts can cause serious injuries;
avoid contact with these parts while they are still
rotating.
•
If something breaks or an accident
occurs during work, turn off the motor
immediately and move the machine away to
prevent further damage; if an accident occurs
with injuries or third parties are injured, carry
out the first aid measures most suitable for
the situation immediately and contact the
medical authorities for any necessary health
care. Carefully remove any debris which
could cause damage or injury to persons or
animals if ignored.
Prolonged exposure to vibrations can
cause injuries and neurovascular disorders
(also called “Raynaud’s syndrome” or “white
finger”), especially to people suffering from
circulation disorders. The symptoms can
regard the hands, wrists and fingers and are
shown through loss of sensitivity, torpor,
itching, pain and discolouring of or structural
changes to the skin. These effects can be
worsened by low ambient temperatures and/
or by gripping the hand grips excessively
tightly. If the symptoms occur, the length of
time the machine is used must be reduced
and a doctor consulted.
Use limitations
•
Do not use the machine if you are unable to hold
it with both hands or keep it steady on your legs
while working.
•
Never use the machine with damaged, missing
or incorrectly positioned guards.
•
Never use the machine without having installed
all the attachments required for each use (as
blower or vacuum collector).
•
Never disengage, deactivate, remove or tamper
with the safety systems/micro switches installed.
•
Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
•
Do not strain the machine too much and do not
use a small machine for heavy-duty work. If you
use the right machine, you will reduce the risk
of hazards and improve the quality of your work.
2.4 MAINTENANCE, STORAGE
Ensure regular maintenance and correct storage
to maintain machine safety and high performance
levels.
Maintenance
•
Never use the machine with worn or damaged
parts. Faulty or worn-out parts must always be
replaced and never repaired. Only use original
spare parts.
The noise and vibration levels shown in
these instructions are the maximum levels
for use of the machine. Suitable preventive
measures must be adopted to eliminate
possible harm caused by high noise levels
and vibration-induced stresses; utilise the
machine at constant speed, firmly hold the
hand grip with adequate strength, utilise
the machine at the minimum speed required
to perform the work, wear ear-protection
devices, make frequent and adequate pauses
during the work.
Storage
•
To reduce fire risks, do not leave containers with
debris inside a room.
2.5 BATTERY / BATTERY CHARGER
IMPORTANT
The following safety instructions
are in addition to the safety requirements provided
in the specific battery and battery charger manual
delivered with this machine.
•
Only use battery chargers recommended by
the manufacturer to recharge batteries. An
inadequate battery charger may cause electric
shock, overheating or corrosive liquid to leak
from the battery
•
Use only batteries specifically designed for
your power tool. The use of other batteries may
cause injuries and fire risks.
2.6 ENVIRONMENTAL PROTECTION
•
Scrupulously comply with local regulations for
the disposal of packaging, deteriorated parts
or any elements with a strong environmental
impact; this waste must not be disposed of as
normal waste, it must be separated and taken
Summary of Contents for BLV 20 Li A
