Stiga Autoclip M7, Operator'S Manual

Page: 43 / 47

41 User’s manual
EN
INSTALLATION OF THE CHARGING STATION PROTECTED BY A TERRACE
> 70cm
> 2m
A
B
D E
F
0 cm 0 cm
Notes:
the example shows how to install the charging station under a terrace, by setting the robot to exit correctly from the narrow area
where it is located. This is done by setting the dimensions of the secondary areas in such a way that the percentage is equal to
100%.
References:
A. charging station under a terrace. There should be 2 m straight perimeter wire before the charging base entrance.
B. the corridor minimum width, where the charging station is located, must be 70cm.
D - E: work exiting in secondary area. See "Programming". Their programming is necessary to allow the robot to correctly exit
from the narrow corridor, where the charging station is located.
F. trampoline. It is recommended to delimit it with perimeter wire.
Programming:
•
garden total size: 1700 smq
•
working time:
-
Autoclip M7: time 1: 10:00 - 12:00 time 2: 15:00 - 17:00
•
secondary areas:
-
area 1- D:
-
percentage: 50%;
-
direction: counter-clockwise;
-
distance: 30m (distance between the charging station and the point "D");
-
area 2- E:
-
percentage: 50%;
-
direction: clockwise;
-
distance: 30m (distance between the charging station and the point "E");