Stiga 13-7454-11, Workshop Manual

Page: 96 / 123

5.4.4 Check
• Check that the cable can move easily in
the housing along the whole length of
the stroke.
• Check that the cable is free of sharp
kinks and other damage. The casing
must be fault free so that water cannot
penetrate.
• Check that the end seals are intact.
5.4.5 Adjustment
1. When the throttle control is in neutral
position it must not be possible to
B
move the arm closer to the idle posi-
tion.
A
2. Put the throttle control at full throttle.
In this position arm A should be
against screw B.
Adjust the nuts of the housing adjuster
sleeve to the criteria above.
WORKSHOP MANUAL
TITAN
Chapter
5 - Control cables
EDITION
2018
Page
9 4