Stiga 13-7454-11, Workshop Manual

Page: 79 / 123

8. Remove the M10 screws G (3x) that
hold the carrier plate/pulley to the fly-
G
wheel as follows:
•Block the flywheel with a
screwdriver or similar and slacken off
the screws.
•Unscrew all the screws half way in a
first stage.
•Then rotate the flywheel one revolu-
tion and remove all
screws.
9. Pull out the pump with the carrier
plate/pulley. Twist off the belts and re-
move them by threading them out be-
tween the carrier plate and the
flywheel.
Assemble all parts in the reverse order.
Tension the belts between steps 4 -5
when installing the belts. See “4.3.4”.
Poly-V belt
Replace the belt for the hydraulic pump
as follows:
1. Remove the rear engine cover. See
“2.2.1”.
2. Remove the right engine cover. See
“2.2.1”.
3. Remove the belt cover by slackening
off the screws A (3x) that hold the cov-
er in place. Use a 10 mm socket.
A
WORKSHOP MANUAL
TITAN
Chapter
4 - Hydraulic system
EDITION
2018
Page
7 7