18
|WTS
WWW.STIeBel-elTROn.cOM
Installation
Installation
f
f
Remove the wall mounting bracket from the lower shell, and
secure it to the wall with the 8x70 screws and washers.
D
00000
33
56
8
f
f
Hook the lower shell and the appliance into the wall
mounting bracket, and secure the appliance to the wall with
the 8x100 screws and washers.
D
00000
33
584
9.2 water connection
!
CAUTION Risk of damage through water
Carry out all water connection and installation work in
accordance with regulations.
Connect the pipework according to the following diagram.
1
3
5
4
2
D
00000
33
58
6
1 Heat pump return
2 Heat pump flow
3 DHW cylinder flow
4 DHW cylinder return
5 DHW cylinder
f
f
Install a blow-off line, and route this out of the appliance
through the entry provided in the lower shell.
f
f
Size the drain so that water can drain off unimpeded when
the safety valve is fully opened. The blow-off aperture of the
safety valve must remain open towards the atmosphere.
f
f
Fit the blow-off line of the safety valve with a constant slope.
