iNSTALLATiON
Electrical connection
18
| WPL-A Premium
www.stiebel-eltron.com
11. Electrical connection
Note
The leakage current of this appliance can be > 3.5 mA.
Note
f
Please observe the instructions for the heat pump
manager.
The connection must only be made by a qualified contractor and
in accordance with these instructions.
You must have permission to connect the appliance from the rel-
evant power supply utility.
11.1 Terminal area
WARNING Electrocution
f
Before working on the appliance, isolate it from the
power supply at the control panel.
Note
The terminals are located in the terminal area of the ap-
pliance.
f
Follow the instructions in the chapter "Preparation / Prepar-
ing the electrical installation".
f
For all connections, use appropriate cables in accordance
with local regulations.
Access to the terminal area
D
00000
35
35
6
D
00000
35
35
8
f
Push the cover upwards.
D
00000
90
34
9
1
2
1 Terminal area
2 Strain relief
f
Route cables and leads through the strain relief fittings.
If space behind the appliance is limited, the terminal area can be
folded out.
D
00000
90
35
1
f
Undo the screw on the terminal area.
