INSTALLATION
Installation
WPKI-HKM E | WPKI-HK E
| 9
ENGL
IS
H
Servomotor
The angle of rotation is electrically limited to 90°. Upon reach-
ing its end stops, the drive will be switched off and switched to
zero volt. The servomotor can be switched to manual control
via the rotary selector on the casing.
Manual mode
Automatic mode
26
_0
3_0
1_06
01
5. Installation
5.1 Circulation pump installation position
!
Material losses
f
f
Observe the circulation pump installation and op-
erating instructions.
!
Material losses
f
f
Do not install the circulation pump on the ceiling
or horizontally on the floor.
D
00000
59
53
7
5.2 Installation example for wall mounting
0
2
4
D
00000
41
95
6
3
1
2
5
4
1 WPKI-HK E
2 WPKI-HKM E
3 WPKI-HKV (not part of the standard delivery)
4 Return
5 Flow
26
_0
3_0
1_0
59
5
Fit the compact installation with the insulation to the ex-
isting pipework.
Tighten the fittings by hand.
Mark the edges of the compact installation on the wall.
f
f
Remove the compact installation from the wall.
26
_0
3_0
1_0
59
6
f
f
Mark the holes to be drilled.
f
f
Drill the holes.
f
f
Insert the rawl plugs into the holes.
26
_0
3_0
1_0
59
7
f
f
Secure the lower insulation shell with the screws and
washers supplied.
