STIEBEL ELTRON Stratos Brahma 3.0, Instruction Booklet, Installation And After-Sales Service

Page: 17 / 36

FITTING THE REMOTE DIGITAL CONTROL
For correct installation of the remote control in the requi-
red position, follow these instructions:
- Choose the position of the remote control:
- away from the appliance;
- on the BASE (provided).
- Install the remote control.
To ensure correct operation, install the remote con-
trol at a MAX distance of 6 metres.
- Remote control away from the appliance
This solution makes it possible to read the perfect room
temperature for comfort. In fact in this position, the remote
control “feels” the temperature at human height.
To ensure correct operation, install the remote con-
trol at a height off the floor between MIN 1m and
MAX 1.5m.
Installation:
- choose the position;
- open the remote control, fit the batteries and check:
- Display unit operation
- range of action (see User Sect.)
Check the range of action:
A) If the LED flashes 4 times a second, reception is correct.
B) If the LED flashes slowly, you are at the limit of the
range of action.
C) If the LED does not flash, you are outside the range of
action.
- mark the position of the fastening holes on the wall and
drill;
- fit the screw anchors and screws most suitable for the
chosen wall;
- fasten the rear part of the remote unit to the wall;
- assemble the front part with Display unit.
.
To ensure correct operation, position the control away
from heat sources, sunrays, heated surfaces and
open transit areas.
I
17 INSTALLER