Stid ultrys User Manual Download Page 38

Page: 38 / 297

–

MU_ULTRYS_V3.0_EN

SPECTRE READ ONLY

The displays depend on the Ultrys version chosen in step 3.

Firmware =7.0

Firmware >=9.0

RS232 / RS485

Serial frame:

*Doubled if the ASCII option is activated.

Data

Data sent in decimal or hexadecimal format.

Padding

Add on the frame leading zeros. If this option is not activated, the leading
zero

won’t sent.

STX+ETX

Add STX (0x02) and ETX (0x03) in the frame.

Carriage return (0x0D).

Line feed (0x0A).

LRC

Checksum byte by XORing of all previously characters without the STX.

ASCII

If this option is activated, the Data will be sent in ASCII mode.

1 byte

X bytes

1 byte

STX

Data*

LRC

ETX

Summary of Contents for ultrys










































































































































































































































































































Search results

Summary of Contents for ultrys

Reviews:

Related manuals for ultrys

Brands by name

Popular brands

Stid ultrys, User Manual

Search results

Summary of Contents for ultrys

Reviews:

Related manuals for ultrys

Brands by name

Popular brands