Stid ultrys, User Manual

Page: 103 / 297

103
SPECTRE NANO READ ONLY
© STid – MU_ULTRYS_V3.0.1_EN
Summary table
Note: as long as the action is detected on the input, the output remains toggled.
Reading mode Options Input Configurable
Outputs
states?
Maintain
during
detection
available?
Output Relay
on
detection
Continuous reading
without using
inputs
No action Yes Yes - If ‘Continuing
during detection
process’ not
activated: the output
state toggles at the
ascent
- If ‘Continuing
during detection
process’ activated:
the output state
toggles to the RF
detection and
remains in this state
as long as, at each
scan is at least one
detection
Yes
Continuous reading
without using
inputs
Activation of
the LED and/or
custom buzzer
(triggered by
the event)
An action on the input
lights the LED and / or
Buzzer according to
the "Custom event"
parameters
Yes No Yes
Continuous reading
without using
inputs
Outpu
activation
(triggered by
the event)
An action on the input
activates the output
Yes Yes - If ‘Continuing
during detection
process’ not
activated: the output
state toggles at the
ascent
- If ‘Continuing
during detection
process’ activated:
the output state
toggles to the RF
detection and
remains in this state
as long as, at each
scan is at least one
detection
Yes
Continuous reading
without using
inputs
Realy activation
(triggered by
the event)
An action on the input
activates the relay
Yes Yes No
Trigger of the
reading by the event
(use of the input)
An action on the input
activates reading on
the lanel
Yes Yes - If ‘Continuing
during detection
process’ not
activated: the output
state toggles at the
ascent
- If ‘Continuing
during detection
process’ activated:
the output state
toggles to the RF
detection and
remains in this state
as long as, at each
scan is at least one
detection
Yes b
a
a
a
a