STI PR-7001 Page 5 Owner'S Manual Download

Page: 5 / 34

ASSEMBLE INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing

materials from your area and place them back into the box. Do not dispose of the packing materials until

assembly is completed. Read each step carefully before beginning.

STEP 1



Attach the

Leveler (27)

to the

Front

Stabilizer

(2)

and the

Rear Stabilizer (3.)



Be sure to tighten the

Leveler (27)

securely against the

Stabilizers (2, 3)

until screw lines

are eliminated as the

drawing 1

shown.

STEP 2

Attach the

Front Stabilizer (2)

and the

Rear Stabilizer (3)

onto the

Main Frame (1)

and secure with the

Washer

(8x38x2.0t)(73),

the

Lock Washer (M8)(78)

and the

Bolt,

Hex Head (M8xp1.25x65mm)(97)

by using socket wrench

as the main assembling drawing shows.



If the bike is not level, review the

LEVELING NOTE

the right side to level the

Levelers (27.)

Detailed Lever- drawing 1

Detailed Lever- drawing 2

Adjustment Plate

Stabilizer

Leveler (27)

LEVELING:

After placing the bike

in the intended location for use,

check the stability of the bike. If the

bike is not level, reviewing the

following direction:

Loosen the Leveler (27) to make
the Adjustment Plate become less
tight.

Adjust the Leveler (27) for leveling.

Tighten the Adjustment Plate
securely against the Stabilizer to
lock the Leveler (27) in stable
position as the drawing 2 shown.

Screw line

Stabilizer

Adjustment Plate

Leveler (27)

Summary of Contents for PR-7001



































Search results

Summary of Contents for PR-7001

Reviews:

Related manuals for PR-7001

Brands by name

Popular brands

STI PR-7001, Owner'S Manual

Search results

Summary of Contents for PR-7001

Reviews:

Related manuals for PR-7001

Brands by name

Popular brands