28
“
C
ONSOLE
I
NSTRUCTIONS
–
D
EFINE
U
SER PROGRAM
”
e.
SET CALORIES:
1. After the
ENTER
button, the following
LED will
display
the
CALORIES
function mode will appear with the display flashing
“0”.
2. Use
UP (
▲)
or
DOWN (
▼)
button to select the desired
CALORIES.
(10 ~ 990 KCAL; 10 KCAL INCREMENT).
3. Press the
ENTER
button to confirm the value of
CALORIES.
CALORIES:
Shows the current energy (calories) burned.
Count Up: If the target calories were not selected,
CALORIES
will
count up from 0 to 999 KCAL.
Count Down: If you have set the target calories
(10 TO 990 KCAL;
10 KCAL INCREMENT)
, the console will count down from that
selected target calories down to 0.
f.
SET LEVEL:
1. After the
ENTER
button,
LED will
display the scrolling message
“INTERVAL 1
”. NOTE:
The
DEFINE USER PROGRAM
allows the
user to manually set the resistance LEVEL, the console will divide
the time into 16 intervals. The user could through their preference
to set the desired resistance LEVEL in each time interval.
2. Use
UP (▲)
or
DOWN (▼)
button to set the
EACH TIME
INTERVAL OF RESISTANCE LEVEL (1 ~16 RESISTANCE
LEVELS; 1 RESISTANCE LEVEL INCREMENT).
Then press
ENTER
button to
confirm.
3. Continue following the above process to finish setting the
preference
RESISTANCE LEVEL
in 16 time intervals. The program
profile will be storied
in the memory after setup.
g.
START WORKOUT:
Press
START
button to start exercise.
During workout, the
TENSION LEVEL
is
allowed to slight adjust at any time by pressing
UP (
▲)
or
DOWN (
▼)
button to match your
workout goal.
3
”
ENDING THE PROGRAM:
Press
CLEAR RESET
button to leave the
program and enter
POWER ON
status.
Summary of Contents for PR-7001
Page 33: ...32 PRODUCT PARTS DRAWING ...
Page 34: ...33 ...
