Stewart Filmscreen – Luxus
5
ABOUT LUXUS
The next generation of Stewart Filmscreen’s Luxus offers a premium below ceiling viewing experience.
The newly redesigned case allows the screen to deploy close to the wall or safely in front of your wall
décor. With the combination of your choice of control and mounting options and with Stewart’s world-
renowned premium screen materials, this screen is one of our most popular selling screens.
IMPORTANT SAFETY INFORMATION
Carefully read the instructions.
This screen must be installed by a qualified electrician.
For supply connections, use wires rated for at least 75 C.
Use copper or aluminum conductors.
For indoor use only.
Do not connect low voltage to line voltage power.
Earth ground terminal connection must be made as shown in wiring diagrams.
Proper short circuit and overload protection must be provided at the circuit breaker distribution
panel. You may use up to a 20 amp maximum circuit breaker with adequate short circuit breaking
capacity for your installation.
USING THIS MANUAL FOR INSTALLATION
If you are using this manual to install the Luxus screen, you should be aware that it describes procedures
for two types of mounting options.
You must refer to the section for the type of mounting system you are
utilizing.
For the instructions related to your specific mount type, refer to the appropriate page:
Wall Mount (Page 9)
Ceiling Mount (Page 10)
For the instructions related to your specific controls, refer to the appropriate page:
IR remote and receiver (Page 12)
12 volt projector trigger (Page 14)
RTS with remote (Page 15)
IR wall switch and receiver (Page 16)
Decora paddle wall switch (Page 17)
IBT-100 for RS-232C interface (Page 18)
⚠
NOTE
This owner’s manual may describe options and features not equipped to the specific screen
you have purchased.