Stewart Filmscreen – Luxus
17
DECORA PADDLE WALL SWITCH (IF EQUIPPED)
A three position momentary wall switch (see Figure 17) can be equipped with the standard IMC control.
The IMC control board comes ready to be operated via the Decora paddle wall switch right out of the
box.
GETTING STARTED
Making the Connections
1.
Connect the RJ45/RJ25 cable to the back of the Luxus case
on the dry contact RJ45 port (see Figure 12).
2.
Cut the other end of the wire and expose the four
conductors.
3.
Connect your wires to the Decora wall switch (see Figure
18).
4.
For RJ45 pinouts (see Figure 23).
Figure 18. Rear of Decora Wall Switch
Down
Up
Common
Ground
⚠
CAUTION
Decora wall switch is to be wired through the dry contact port only. The dry contact port
is low voltage. Do not wire the wall switch through a high voltage line.
Figure 17. Front of Decora Wall Switch
