Luxus
13
OPERATING THE SCREEN
The method you use to raise and lower the screen depends on the type of switch control device you
have selected
When you lower or retract the screen, it will stop at its preset limit If an obstacle (such as a person or
furniture) is in the path of the screen as it is lowered, use the switch control to stop the screen’s motion
(it will not automatically stop if it hits an obstacle)
The motor is designed to be used for short operations such as lowering the screen in preparation for
viewing The motor is not designed for continuous duty If the motor operates continually for more than a
few minutes, it may automatically shut off to prevent damage from overheating If the motor occasionally
needs to be run more than normal, for example during initial setup and positioning, allow time for the
motor to cool down
In general, when the screen is not in use, you should store it in the fully retracted position to protect the
surface It is best practice, however, to deploy the fabric for extended periods Periodic deployment on
a regular basis, will maximize the flatness and uniformity of the deployed surface The screen definitely
benefits from frequent and extended periods of deployment
i
CAUTION
The unit emits any smoke, heat, abnormal noise or unusual odor
`
`
The unit is damaged in some way, such as damage from a water leak Do not operate the motor
when any of the following occurs: If any of these situations occurs, call a qualified service person
SWITCH AND TRIGGER WIRING
The 3-button, low-voltage keypad operates with only 3 conductors; common, up & down The
“Stop” function shorts both directions internally to common You can use both switching functions
simultaneously by simply connecting a splitter to the Luxus RJ Input jack The trigger input is only a 2
conductor connection
