Begin Hull Construction
☐
Starting at the bow of the boat key balsa
formers F1, F2, F3, F4, F5, F6, and F7 to
balsa ribs R1. (R1 is etched designating the
proper install locations of formers F1-F7.)
☐
Install the sub rib R2a and sub former R2b
just forward of F1 as illustrated below.
☐
Key formers R2 to the hull assembly aligning
each notch in F2 to the outside tabs of the
formers.
☐
Install the 1/8” plywood battery tray BT1
spanning formers F3, F4, and F5. First, key
BT1 to notch in F3 then gently bow F5 aft as
you work BT1 into position within the frame.
☐
Now key F8 to hull assembly spanning
formers F3, F4, F5, and F6 and ribs R1. F8
MUST fit FLUSH with the top surface of hull
formers. Tack glue F8 to retain.
☐
Install 1/4 in. Square x 7-1/4 in. basswood
leading edge stock.
© 2010 Stevens AeroModel all rights reserved. V2.0 (11.10.2014)
Page 8 of 25
