Float Construction Cont.
☐
Tack F6 to front of frame assembly.
☐
Fit and bond F7a to F7b to create part F7.
☐
Fit F7 to underside of assembly, behind the
step. Square assembly on a flat surface and
bond with medium CA.
☐
With etching up and arrow forward, tack ply
part F8(L) to slots within frame sides and tabs
on former F3.
Note: When building right float
use part F8(R).
☐
With etching up and arrow forward, tack ply
part F9(L) to slots within frame sides and tabs
on former F5.
Note: when building right float
use part F9(R).
☐
Fit and bond F10a to F10b to create part F10.
Sky Scout Floats © 2010 Stevens AeroModel all rights reserved.
Page 8 of 13
F6
F7b
F7a
F7
F8(L)
F3
F9(L)
F5
F10a
F10b
STEP
