Float Construction
The following assembly photos detail building the
left
float assembly. Build two floats, a
right
and
left
, to complete the kit.
☐
Fit former F2 to front slots of inner frame F1.
Proper fit, the tabs on former F2 (as well as
F3, F4, and F5) will extend past inner frame
by 1/16 in., and will later be used to locate the
F11 side panels.
☐
Fit former F3 to inner frame F1, behind former
F2
☐
Fit former F4 to inner frame F1, behind former
F3.
☐
Fit former F5 to rear slots of inner frame F1,
behind former F4.
☐
Fit remaining inner frame F1 to formers.
Invert assembly, square on a flat surface and
tack glue formers to inner frames.
Sky Scout Floats © 2010 Stevens AeroModel all rights reserved.
Page 7 of 13
F1
F2
F1
F2
F3
F1
F2
F3
F4
F4
F5
F1
F1
F1
