Finishing and Installation Cont.
☐
Use the diagrams supplied with this kit to
identify the wire struts. Mount the rear wire
strut to the floats using four steel landing gear
straps and eight #2 - 1/4 in. screws.
☐
Mount the forward and middle wires to the
forward mounting plate in the same way.
Note: The forward and middle strut wires nest
together in the forward slot on the floats.
☐
Remove the gear from your Sky Scout.
☐
Loosely mount the floats to the fuselage.
Reuse the original gear straps and hardware.
The middle and rear wires nest together in the
rear slot and will be retained using two gear
straps and four #2 - 1/4 in. screws.
☐
Align floats equal distance apart and parallel
with fuselage. Tighten screws.
Sky Scout Floats © 2010 Stevens AeroModel all rights reserved.
Page 12 of 13
Rear Strut
Front
Forward Strut
Middle Strut
