Float Construction Cont.
☐
Bond one end of ply float bottom F16 to
former F4, ensuring that the edge of F16 is
flush with the rear face of F4.
☐
Bend F16 around assembly bonding with
thick or medium CA. The
left
float is now
complete. Repeat the steps beginning on
page 7 to build the
right
float.
☐
Repeat the steps beginning on page 7 to
build the
right
float.
☐
Sand floats smooth, slightly round all edges.
leave the edge of the step sharp.
Finishing and Installation
☐
Cover floats with a high quality material such
as StevensAero AeroFilm.
☐
Open slots for landing gear wires on top of
the floats.
☐
Using a sharp knife or warm soldering iron,
open the screw holes in the mounting plates.
Sky Scout Floats © 2010 Stevens AeroModel all rights reserved.
Page 11 of 13
F16
F4
F16
