Fuselage (continued)
8.
Fit the fuselage side F8 (sheet 02/09, 1/20 in. balsa) to the
right
side of the central crutch assembly.
9.
Fit the other fuselage side F9 (sheet 01/09, 1/20 in. balsa) to the
left
side of the crutch. Square the
assembly on a flat surface, and final bond all parts together with thin CA.
10.
Fuselage Rear -
Fit former F10 (sheet 04/09, 1/20 in. balsa) to the vertical slots mid-way back in
the rear of the fuselage sides, oriented so that the edge etched “Top” corresponds with the top of the
assembly.
11.
Fit former F11 (sheet 01/09, 1/20 in. balsa) to the vertical notches in the rear portion of the fuselage
sides, oriented so that the top edge corresponds with the top of the other formers. Do not bond.
12.
Fit F12a (sheet 02/09, 1/20 in. balsa) to the front of F12b (sheet 03/09, 1/20 in. balsa) to form the
fuselage top. Bond with CA.
13.
Fit and tack glue the fuselage top F12 to the
top
edges of the fuselage sides spanning formers F6, F3,
F5, F10, and F11.
14.
Turn the fuselage up side down. Fit and tack glue the fuselage bottom F13 (sheet 01/09, 1/20 in.
balsa) to the
bottom
edges of the fuselage sides, spanning formers F5, F10, and F11. Square the
assembly on a flat surface and bond all parts together with CA. Pull the
rear
of the fuselage sides
together, fitting the tabs at the
rear
of the fuselage bottom F13 to the notches at the rear of the
fuselage side,
Build Instructions
T
oonScale
TM
1911 1/2 Nieuport UM - Build Ins
tr
uc
ti
ons © 2015 S
te
vens AeroModel, a
ll
rights reserved.
Page 10
□
□
□
□
□
□
□
