Build Instructions
QuickOats
™
(100)
- Kit Inventory
Laser-cut wood, 7 sheets (See Sheet Wood Inventory, page 5)
Build Instructions
Photo Supplement
Detail Set, 2 sheets, 11 in. x 17 in.
Acetate Windscreen
Taped to back of wood brick:
1 Landing gear, wire, .032 in. x 12 in. (1002)
2 Pushrods, wire, .020 in. x 12 in. (2020)
Hardware Bag:
1 Heat shrink tube, 1 1/2 in. x 1/16 in. (5012)
1 Part E5, Basswood elevator joiner
1 Hardwood dowel, 1/8 in. diameter x 4 in. (1020)
1 Pair 1 1/8 in. wheels [SH540] (5015)
6 Rubber Bands, #16
QuickOats 100 -
Background
Our
QuickOats (100)
is loosely based on the popular Quaker Flash free flight design and is a
lighthearted caricature, of the styling cues that gave the Quacker Flash its unmistakable classic lines.
First and foremost we concentrated on creating a versatile, easy to fly, radio control arrangement that
would be suitable for both novice and experienced pilots alike. We also chose to support popular micro
hardware from leading hobby vendors – that would allow the builder to source everything they needed, to
complete the model, from their favorite hobby supplier. When equipped and finished, as suggested with
the brushed power system, the 2 oz. flying weight of the
QuickOats
, will allow for effortless piloting of the
model within the confines of larger indoor gymnasiums.
Of course, the next best thing to flying a
QuickOats
is building one! Thanks to our
modern kit design and
trouble-free, interlocking build, the
QuickOats
frames quick and true – using signature laser-cut assembly
processes pioneered by Stevens AeroModel.
QuickOats™ (100)
- Build Instructions © 2010 Stevens AeroModel, all rights reserved.
Page 3