Wing
(continued)
39.
Fit and “tack glue” sub-rib, part W17 (sheet 01/08, 1/16 in. balsa) to the first notch in W16,
outer wing spar. Refer to the
Top View
-
Wing
drawing on the plan set for placement.
40.
Locate wing rib W18 (sheet 01/08, 1/16 in. balsa).
Note:
W18 includes a stand-off tab that
will create the washout required for the wing tip. Leave the tab in place, until directed to
remove it in a later assembly step. Fit and ‘tack glue” rib W18 to the wing spar. Refer to
the
Top View
-
Wing
drawing on the plan set for placement.
41.
Locate rib W19 (sheet 01/08, 1/16 in. balsa).
Note:
W19 includes two stand-off tabs. They
will help form the wing tip taper and washout. Do not remove the tabs until directed to, in a
later assembly step. Fit and “tack glue” rib W19 to the W16, outer wing spar. Refer to the
Top View
-
Wing
drawing on the plan set for placement.
42.
Fit and “tack glue” the leading edge web, part W20 (sheet 04/08, 1/16 in. balsa) to the
front
of ribs W5, W17, and W18. The arrow at the end of W20 should point toward rib W5.
43.
Fit and “tack glue” the leading edge, part W21 (sheet 05/08, 3/32 in. balsa) to the leading
edge web and the
front
of ribs W5, W17, and W18. The arrow at the end of W21 should
point toward rib W5.
Note:
W21 does not contact the front of rib W19.
Build Instructions
Playmite 75
- Build Instructions © 2014 Stevens AeroModel, all rights reserved.
!
Page 18
□ □
□ □
□ □
□ □
□ □