20
21
LED Flashes:
Descripti on
1 blink
2 blink
s
3 blink
s
4 blink
s
5 blink
s
6
blink
s
7
blink
s
Remote control panic
Movement inside the vehicle (ultrasound)
Door/hood sensor
Igniti on key
Block
Ba� ery cut (power supply of alarm)
Ultrasonic receiver problem
PROGRAMMING
18
Nº of Beeps
Signal
Functi on
Emi� ed
Received
Defaut Confi g.
Maximum
Programming controls
Negati ve
3 Beeps
200mA
200mA
Enabled
150mA
0,8 seconds
Enabled
200mA
Enabled
Negati ve
Negati ve
12V
14 seconds
10A
Disabled
350mA
Disabled
200mA
Automati c lock
(auto-lock)
12V
1
Lock
5
Lockdown
3
Sound Control
7
Expansion
9
Door
2
Unlock
6
Siren
4
Blinker
8
Auxiliary
10
Trunk/Hood
11
Accessory Positi on
12
Adjustment of ultrasound sensiti vity
(see secti on 15)
Negati ve
Anti -Theft For Starti ng Igniti on
Negati ve
Automati c lock
Negati ve
Enable / Disable alarm
Factory Confi guarati ons
Enable / Disable alarm with beeps
Enable / Disable alarm with blinkers
Lock pulse ti me:
1 Beep:
2,5 segs
/ 2 Beeps:
0,8 segs
12V
Expansion
ti me:
•
1 Beep:
14s
•2 Beeps:
0,2s (GM)
•3 Beeps:
VW G5
•4 Beeps:
FIAT
Anti -theft for opening the door
Positi ve dedicated
Aft er the 12º beep, a long beep will sound indicati ng that you are leaving programming
mode without making any changes. Turning the igniti on off also exits programming
mode and the alarm will respond with a long beep. In this case, the programming is
not changed.
Enabled
Enabled
ALARM SIGNALS
19
Connect all the wires (signals and power)
of the alarm according to the installati on
diagram
(see secti on 22)
;
Clean the locati on for the ultrasonic
capsules. It is recommended that the
capsules be installed 15 cm from the
top-down windshield. For opti mal
performance, a� ach them as shown to
the side. If necessary, adjust the ultrasonic
sensors aft er installati on
(see secti on 18)
.
ULTRASOUND SENSOR INSTALLATION
20
LED
ALARM
DISABLED
RELEASE THE MASTER BUTTON
AT THE DESIRED FUNCTION
1 BEEP ACTIVATED
2 BEEPS DEACTIVATED
TURN ON
IGNITION
PRESS THE
MASTER BUTTON
LISTEN CONSECUTIVE
BEEPS OF THE FUNCTIONS
