stertil-KONI ST 1055, Installation, Operation & Service Manual, Page: 12 / 50

7
2.4 SAFETY MEASURES
The lifting system is provided with safety and protection features. Even so, caution is required when using the lifting
system.
Work safely!
Stertil B.V. have made every effort to inform you as correctly and completely as possible on any dangers associated
with operation of the lifting system. You must ensure and are responsible for compliance with these behavioural
guidelines.
The buyer/user is obliged to familiarise operating, cleaning and maintenance personnel with these instructions.
Upon their arrival, check deliveries for:
- any damage and/or missing parts due to transport. Make sure that the carrier draws up a transport damage report
on the spot.
- correctness and completeness; have all parts (additionally) and or accessories ordered been supplied?
In the event of damage always contact Stertil B.V. or the supplier.
All worn or broken parts need to be replaced with genuine lift manufacturer supplied parts.
MANUFACTURERS INSTRUCTIONS TO THE LIFT OWNER/EMPLOYER
The owner/employer shall ensure that lift operators are qualified and that they are trained in the safe use and
operation of the lift using the manufacturers operating instructions; ALI/SM 93-1, ALI Lifting it Right safety
manual; ALI/ST-90, ALI Safety Tips card; ANSI/ALI ALOIM, American National Standard for Automotive Lifts-
Safety Requirements for Operation Inspection and Maintenance; ALI/WL Series, ALI Uniform Warning Label
Decals/Placards.
The owner/employer shall establish procedures to periodically inspect the lift in accordance with the lift
manufacturers instructions; ANSI/ALI ALOIM, American National Standard for Automotive Lifts-Safety
Requirements for Inspection and Maintenance; and the employer shall ensure that lift inspectors are qualified and
that they are adequately trained in the inspection of the lift.
The owner/employer shall maintain the periodic inspection and maintenance records recommended by the
manufacturer or ANSI/ALI ALOIM, American National Standard for Automotive Lifts-Safety Requirements for
Inspection and Maintenance; and the employer shall ensure that lift inspectors are qualified and that they are
adequately trained in the inspection of the lift.
The owner/employer shall display the lift manufacturers operating instructions; ALI/SM 93-1, ALI Lifting it Right
safety manual; ALI/ST-90, ALI Safety Tips card; ANSI/ALI ALOIM, American National Standard for Automotive
Lifts-Safety Requirements for Operation Inspection and Maintenance; in a conspicuous location in the lift area
convenient to the operator.
The owner/employer shall provide necessary lockout/tagout means for energy sources per ANSI Z244.1-1982
(R1993), Safety Requirements for the Lockout/Tagout of Energy Sources, before beginning any lift repairs.
The owner/employer shall not modify the lift in any manner without the prior written consent of the manufacturer.
IMPORTANT SAFETY INSTRUCTIONS
- Read all instructions.
- If an extension cord is necessary, a cord with a current rating equal to or more than the equipment must be
used. Cords rated for less current than the equipment may overheat. Care should be taken to arrange the
cord so that it will not be tripped over or pulled.
- Always unplug equipment from electrical outlet when not in use. Never use the cord to pull the plug from
the outlet. Grasp plug and pull to disconnect.
- Let equipment cool completely before putting away. Loop the cord loosely around equipment when storing.
- To reduce the risk of fire, do not operate equipment in the vicinity of open containers of flammable liquids
(gasoline).
- Adequate ventilation should be provided when working on internal combustion engines.