6
FAUCET INSTALLATION
Step 2 - Connecting the water supply
1. Fit the flexible pipes coming from the Tubular
base to the solenoid valve housing.
2. Fit the water supply inlets (hot and cold
water inlet) to the adapter at each of the
solenoid valve housings.
Note:
Make sure the filters are located between
the solenoid housings and the water inlets.
Before proceeding to step 3, check that no
objects are in front of the sensor besides the
washbasin.
Remove now the protecting sticker that
covers the sensor.
3. Connect the cable coming from the electronic unit that
leads to the solenoid valves to the power splitter.
See the
figure at the left.
Important:
This product includes a self adjusting
sensor. The ideal sensor range for the specific
location will be set automatically.
