4
PRE-INSTALLATION INFO
Check contents
Separate all parts from the packaging and check each part with
the “Pack contents” section.
Pay attention to the different models variations.
Make sure all parts are accounted for before discarding any
packaging material.
If any parts are missing, do not attempt to install your Extreme
electronic faucet until you obtain the missing parts.
Warnings
Do not install the system facing a mirror or any other electronic
system operated by an infra-red sensor.
To prevent reflection problems, it is recommended to keep a
minimum distance of 1.50 meters between the faucet and any
other objects.
Preparation for installation
Flush water supply lines thoroughly before installing the faucet. Do
not allow dirt, Teflon tape or metal particles to enter the faucet.
Shut off water supply.
Important
All plumbing is to be installed in accordance with applicable
codes and regulations.
