14
15
SPARE PARTS LIST
LIMITED WARRANTY
Y. Stern Engineering Ltd. warrants that its electronic products will be free of defects in
material and workmanship during normal use for two years from the date the product is
purchased.
If a defect is found in normal use, Y. Stern Engineering Ltd. will, at its discretion, repair,
provide a replacement part or product, or make appropriate adjustments. Damage caused
by accident, misuse, or abuse is not covered by this warranty. Improper care and cleaning
will void the warranty. Proof of purchase (original sales receipt) must be provided to Stern
Engineering Ltd. with all warranty claims.
Stern Engineering Ltd is not responsible for labor charges, installation, or other incidental
or consequential costs other than those noted above. In no event shall the liability of
Stern Engineering Ltd. exceed the purchase price of the product.
If you believe that you have a warranty claim, contact your Stern Distributor, Dealer or
Plumbing Contractor. Please be sure to provide all pertinent information regarding your
claim, including a complete description of the problem, the product, model number,
the date the product was purchased, from whom the product was purchased and the
installation date. Also include your original invoice.
Y. STERN ENGINEERING AND/OR SELLER DISCLAIM ANY LIABILITY FOR SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty excludes product damage due
to installation error, incorrect maintenance, wear and tear, battery, product abuse, or
product misuse, whether performed by a contractor, service company, or the consumer.
This warranty does not cover product damage caused by the following:
- Incorrect installation.
- inversions of supply pipes.
- Pressures or temperatures exceeding recommended limits.
- Improper manipulation, tampering, bad or lapsed maintenance.
- Foreign bodies, dirt or scale introduced by the water supply or soap tank.
- Use of the soap outside of viscosity specifications.
- Alteration of the original soap/foam dispenser components (including pipes).
10-Pack Sensor Kit - Extreme CS SD
08008005
10-Pack Sensor Kit Extreme CS SD 2030
08008004
Soap Dispenser Pump
07222032
6-Pack Soap Bottle 1L
07100035
6-Pack Soap Bottle 1L Support Kit
07100037
Battery box for 6xD batteries
06530041
12V Transformer (EU)
06522081
12V Transformer (UK)
06522086
12V Transformer (US)
06522080
12V Transformer (AU)
06522085
Remote Control for Soap Dispenser (Optional)
07100008
Soap & Water Remote Control (Optional)
07100014
MAINTENANCE
Care and cleaning of chrome and special finishes
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like.
Use of any prohibited cleaning or maintenance products or substances could damage the
surface of the soap dispenser. For surface cleaning use ONLY soap and water, then wipe
dry with a clean cloth or towel. When cleaning bathroom tiles, the soap dispenser should
be protected from any splattering of harsh cleansers.
Disassemble of the soap pipe from the pump
The soap pipe can be disconnected from the soap pump by a simple slide & pull action.
The sliding ring of the quick connection fixation nipple on the pump should be pulled
down. It releases the open end of the soap pipe which can then be easily pulled out.
Clean the soap tank
Clean out the tank prior to refill by flushing warm water through the hoses and pump until
clean water is released from the spout. TIP: Keeping a spare tank will enable this process
to be completed in a speedy and hygienic manner with minimal downtime.