5
PRE–INSTALLATION INFO
Check contents
Separate all parts from packaging and check each part with the pack
contents section.
Make sure all parts are accounted for before discarding any packaging
material. If any parts are missing, do not attempt to install the electronic
flush valve until you obtain the missing parts.
Warnings
Do not install the system facing a mirror or any
other electronic system operated by an infra-
red sensor.
To prevent reflection problems, it is recommended
to keep a minimum distance of 1.50 meters
between the flush valve and other objects.
Preparation for installation
Flush water supply lines thoroughly before
installing the flush valve. Do not allow dirt,
Teflon tape or metal particles to enter the flush
valve.
All plumbing is to be installed in accordance
with applicable codes and regulations.
Important:
For the optimal performance of this flush valve, the entire
piping infrastructure from the main big water-supply pipe down to
the W.C. would have
1”
diameter.
